Controller program name : DUC1
| System parameter | Content |
|---|---|
| Hardware type | COSMOS 710 OPEN |
| Hardware version | 5.00 |
| Firmware version | 1.064d |
| MAC address | 3018CF003915 |
| Serial number | OPEAA14613 |
| Kernel-Version | Linux version 2.6.24.6 #1097 PREEMPT Wed Mar 27 12:20:21 CET 2019 |
| COM-Mode | COM2 |
| SD-Card | Type 1 |
The following options are activated within the listed values.
These values do not guarantee that the functionalities are already available in this version.
| Option | Value |
|---|---|
| MAC adresse | 3018CF003915 |
| Activation of the options | 1 |
| COM1: service functions | 1 |
| COM: SPS-protocol | 1 |
| COM: COSMOS MULTI-protocol | 2 |
| COM: max. number of EIB-data points | 0 |
| COM: max. number of M-Bus device addresses | 250 |
| COM: max. number of modems | 2 |
| COM: max. number of IO27 | 31 |
| CAN1: max. number of OPEN IO modules | 32 |
| CAN1: max. number of control panels | 10 |
| CAN1: max. number of SRC | 32 |
| ModBus: slave-protocol | 0 |
| ModBus: master-Protocol max. number of data points | 250 |
| Ethernet: COSMOS MULTI-protocol via TCP/IP | 4 |
| Ethernet: max. TCP/IP controller | 2 |
| COBA optimization: ventilation control (main loop) | 0 |
| COBA optimization: zone control (supply loop/exhaust loop) | 0 |
| OPENbalance: zone control (supply loop/exhaust loop) | 0 |
| OPENdynamics: areas | 0 |
| DMX channels | 0 |
| OPENview graphical user interface | 1 |
| Individual Options | 0 |
| Application level | 0 |
| DALI interfaces | 0 |
| BACnet: max. number of Objects | 0 |
| flashcard: memory extension in MB | 2048 |
| M-Bus Routing | 0 |